Having purchased this bungalow in Tavistock Street, Bletchley with the intention of renovating it by enlarging its footprint and remodelling the interior; our clients contacted us for help with the design and planning of the project.
The main aim of the remodelling exercise was to open up the bungalow roof space to create a usable first floor which would then house a new bedroom; in addition to creating ‘drop lighting’ into darker areas of the ground floor where a new kitchen area would be situated.
When it comes to loft conversions, they can be quite tricky at the best of times, but providing the shafts for the drop lighting added an extra structural difficulty we needed to plan for.
Our clients have worked very hard to project manage and, in some cases, even provided the labour for this project with the end result being a stunning kitchen/diner with lots of natural light flooding in and a new light and airy bedroom upstairs.
If you are embarking on a project like this it is essential to have a thorough set of good detailed plans; and a pre-requisite to this is a good scheme where all of the fundamental difficulties have been considered and preferably designed away. This means that even a quite large design change is easier to manage if thorough plans have been produced beforehand, and in our client’s case we are now tying up some changes initiated during the building work.
We always recommend to clients that once the work starts it is best not to change the design, but sometimes it is inevitable, especially with old buildings and this was the situation here. However, because we had plans to work from, it made the process much easier and I am sure you will agree that they have done a fantastic job project managing it and we have thoroughly enjoyed working with them to create their dream living space.
The ’work triangle’ is something that clients can often come across when thinking of designing their new kitchen. It seeks to describe the perfect relationship between the sink, cooker, and refrigerator. It has always been said that this triangle should be quite compact to allow the cook to access all crucial parts of the kitchen without the need to walk far when preparing meals. Even though the basic idea still applies, it needs a few updates since our kitchens have become more complex, involving much more equipment; microwave, multiple ovens, and separate hob. Some even include a built-in coffee machine. Despite the dishwasher not having a part in food preparation, many of you will surely admit that often you find yourself looking for the one knife you need, and find it in the dishwasher, used to prepare a meal earlier that day. The conclusion we can often come to when thinking about these aspects is “I need a bigger kitchen”, but that could make it an impractical one in terms of how far you’d have to walk to get a meal prepared. Kitchen preparation space is often sacrificed for the sake of fitting everything into a smaller space, but when you’re cooking fresh meals enough space to prepare it in is paramount.
The layout of a kitchen can be described with one of the following terms; island, galley, bay or L shaped.
Galley kitchens are usually only on one side, sometimes two but this makes it much more compact as well as shorter.
Islands are very popular in many modern kitchens which is, in my opinion, due to the aesthetics of them rather than their practicality. They can work quite well, but only if you accept that one side will be for guests to look at; for presentation only as if you tried to store things on all sides, you’d get your daily cardio in by constantly running around it for the different utensils etc.
L shaped kitchen layouts can work out okay but can sometimes be too spread out.
Bay kitchens are, in my view, the best in terms of practicality, they’re also sometimes referred to as peninsula kitchens.
Here at Building Tectonics, when we design a kitchen we always show a kitchen layout, but by no means is that the permanent design; this is just to show that at least one suitable layout can be accommodated. The layout is often adopted by the client, even if it’s not accepted as the final kitchen design, at least we know a sensible kitchen configuration fit into the available space. I’ve been to a few houses where the architect hasn’t paid as much attention to detail and as a result, the cooker has ended up miles away from the rest of the kitchen. If you’re designing a kitchen space please don’t accept a space that doesn’t achieve the basic function of cooking. If the space isn’t working then call in a company like Building Tectonics to advise you on how you could alter or extend the space to get a more functional kitchen.